Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual page 12

Overview of the WEBS-PA-1
S/N Connectors
N/A
4
PRIMARY ETHERNET
5
PORT (PoE)
SECONDARY
ETHERNET PORT
6
POWER SUPPLY
7
INPUT
LINE LEVEL AUDIO
8
INTERFACE
SERIAL INTERFACE
9
12
Description
DC) from the main board and data line.
N/A
RJ-45 connector with PoE support for connecting
10/100BASE-T Ethernet.
RJ-45 connector for connecting any additional IP device
(e.g. IP Camera, notebook computer). This port does not
provide PoE.
Local power (12VDC, 24V AC/DC).
For selection of power supply between 12VDC and 24V
AC/DC (Refer to 1.5 Related Documents: WEBS-PA-1
Quick Installation Guide, version 1.0
NOTE: Dedicated line regulated power supply required.
3.5mm audio jack to connect to an external amplifier.
DB9 connector for serial console access.
Talk-A-Phone Co.