Ping And Traceroute - Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual

4.7.5 Ping and Traceroute

The Ping and Traceroute page is used to perform connectivity tests. The Ping command can be used
to determine whether a destination is reachable from the Communications Module or not. Traceroute
helps in determining intermediate hops to the destination IP address.
Login → Maintenance → Ping and Traceroute
5
To ping or traceroute:
1 Enter an IP Address.
2 Select Ping or Traceroute.
3 Click Apply.
4 The status bar indicates the command executed.
5 The Results section displays the results of the executed command.
28
1
2
Figure 13 Ping and Traceroute
Using the Web GUI
3
4
Talk-A-Phone Co.