Voip; Paging Settings - Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual

4.5 VoIP

4.5.1 Paging Settings

The WEBS-PA-1 Communications Module is used as a paging device by a WEBS Contact
The page can be outputted through the line level output.
Login → VoIP → Paging Settings
To configure paging settings:
1 Select Speaker to send the incoming audio page to the attached speaker. The Line Level Output
option is only available for specific models.
2 Click the drop-down menu to adjust the Output Gain for all incoming pages before sending to the
selected audio paging output. Each level adjustment corresponds to approximately 3dB.
3 The Communications Module displays Unregistered or Registered @ <WEBS_Contact_Server_IP
Address> for Registration Status on the WEBS Contact
4 It is strongly recommended to deregister the device from the WEBS Contact® Server. In error
situations where the WEBS Contact® Server is unable to deregister the device, select Deregister
check box to clear the registration status.
5 Click Apply to save settings.
20
4
Figure 7 Paging Settings
®
Server.
Using the Web GUI
5
1
3
Talk-A-Phone Co.
® Server.
2