Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual page 52

Appendix C: Sample Serial Configuration File
AuxOp3DeActOnAuxIn1Act = 0
AuxOp3DeActOnAuxIn2Act = 0
AuxOp3DeActOnAuxIn3Act = 0
AuxOp3DeActOnAuxIn1DeAct = 0
AuxOp3DeActOnAuxIn2DeAct = 0
AuxOp3DeActOnAuxIn3DeAct = 0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VMActionOnBut1CallInit, VMActionOnBut2CallInit ,
++ VMActionOnInboundCallsAns, VMActionOnAuxIn1Act,
++ VMActionOnAuxIn2Act & VMActionOnAuxIn3Act
++
++ Description : Configured VM will be played to the user upon call
++ initiation by the specified button
++
++ Valid values : 1 - 5,Disable
++ Disable - Disable the field
++ 1 - 5 Specifies the number of the VM to be played to the
++
++
++ VMActionOnBut1CallInit = Disable (Default value)
++
++ Field name : VMActionOnInboundCallsAns
++
++ Description : Configuring the specified VM to start playing or stop
++ playing when the inbound calls are answered.
++
++ Valid values : 1 - 10, Disable
++ Disable - Disable the field
++ 1 - 5 specifies the number of the VM to be played to the user.
++ 6 -
++ 7 -
++
++
++ Note : Admin can similarly program values for VMActionOnAuxIn1Act,
++ VMActionOnAuxIn2Act & VMActionOnAuxIn3Act on the guidelines
++ for the VMActionOnInboundCallsAns
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VMActionOnBut1CallInit = Disable
VMActionOnBut2CallInit = Disable
VMActionOnInboundCallsAns = Disable
VMActionOnAuxIn1Act = Disable
VMActionOnAuxIn2Act = Disable
VMActionOnAuxIn3Act = Disable
VMActionOnAuxIn1DeAct = Disable
VMActionOnAuxIn2DeAct = Disable
VMActionOnAuxIn3DeAct = Disable
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VM1PlayOnRemoteKeyCode, VM1StopOnRemoteKeyCode
++
++ Description : The specified VM will be played/stopped to the user upon
++ dialing the configured keycode from the remote side.
++
++ Valid values : Disable, Combination of 0-9,*,# with maximum of 4 characters
++ Disable - Disable the field
++ *12#
++
++
++ VM1PlayOnRemoteKeyCode = Disable(Default value)
++
52
user.
Stops the VM #1(if playing)
Stops the VM #2(if playing).Similarly the values 8 to 10
can be configured to stop the VM #3 TO VM #5
- can be used to either start or stop VM #1 play to
user when dialed from the remote side.
Talk-A-Phone Co.