Appendix C: Sample Serial Configuration File - Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual

Appendix C: Sample Serial Configuration File

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ This Configuration File is a sample configuration file, which has all the
++ default and allowed values for configurable attributes.
++
++ Admin/Programmer can modify the values as per permissible value/range for
++ defined parameters as described in comments given for each parameter.
++
++ Version - 1.0.0.0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VoIPProtocol
++ Description : Protocol to be used for originating calls
++ Valid values : VoIPProtocol = 1 for SIP (Default Value)
++ VoIPProtocol = 2 for H.323
++ Note : Changing this value will cause the phone to reboot.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VoIPProtocol = 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : AutoAnswer
++ Description : Enables/disable auto answer mode of phone operation.
++ Valid values : AutoAnswer = 0 - Disable
++ AutoAnswer = 1 - Enable (Default Value)
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
AutoAnswer = 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : OperationPriority
++ Description : Operation Priority between Phone and Paging operations.
++ Valid values : OperationPriority = 1 Phone Mode has priority over Paging
++ Mode(Default)
++ OperationPriority = 2 Paging Mode has priority over Phone
++ Mode
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
OperationPriority = 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : CallerIDPresentation
++ Description : Caller ID presentation to the Remote party.
++ Valid values : CallerIDPresentation = 0 - Disable
++ CallerIDPresentation = 1 - Enable (Default Value)
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CallerIDPresentation = 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : CallerID
++ Description : Caller ID to be present to Remote Party.
++ Valid values : 30 chars long, a-z,A-Z,*,0-9,.,- , No spaces allowed.
++ Default value is VOIP-500
++ Note : This will be sent when CallerIDPresentation = 1