Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual page 25

Fields
Source URL
Destination URL
Duration
Voice Codec Used
Mode
Fail Code
Fields
Date
Aux Type
Aux State
25
Description
Remote
For paging, the Originator is always Remote.
URL of the source of the call (maximum of 30 characters).
URL of the destination of the call (maximum of 30 characters).
hh:mm:ss
This indicates how long (in seconds) the call event or page event
lasted.
This field is only valid for successful calls/pages.
The voice codec being used for a given call.
The valid entries are:
G.723, G.729, G.711 A law, and G.711 U law
This field is only valid for successful calls/pages.
The VoIP protocol used for a particular call (SIP or H.323).
The reason code for the failure of a particular call/page.
This field is only valid for unsuccessful calls.
Call Logs
Description
mm:dd:yyyy hh:mm:ss
The date and time for an Auxiliary
activation/deactivation.
Aux Input 1/2/3 or Aux Output 1/2/3
Displays the status of an Aux Input or Aux
Output (Activated/Deactivated).
Aux Logs
Talk-A-Phone Co.