Factory Settings - Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual

Internal View: RESET BUTTON) on the WEBS-PA-1. Pressing the Reset button once will reboot the
WEBS-PA-1.

7.4 Factory Settings

The Communications Module can be reset to factory settings using the Reset button (Refer to 2.1.2:
RESET BUTTON). Press and hold the Reset button for 10 seconds. The Communications Module
will reboot with factory default settings.
Note: All data including IP address and username/password will be reset to factory defaults.
37 Talk-A-Phone Co.