Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual page 42

Appendix C: Sample Serial Configuration File
LineLevelOutputGain = 16
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : Speaker
++ Description : Enable/disable Speaker state, applicable to both Handset
++ and Handsfree
++ Valid values : Speaker = 0 - Disabled
++ Speaker = 1 - Enabled (Default value)
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Speaker = 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : SpeakerGain
++ Description : Speaker gain, applicable to both Handset and Handsfree.
++ Valid values : 1 to 20, Default value is 12
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
SpeakerGain = 12
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : Mic
++ Description : Enable/disable Mic state, applicable to both Handset
++ and Handsfree
++ Valid values : Mic = 0 - Disabled
++ Mic = 1 - Enabled (Default value)
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Mic = 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : MicGain
++ Description : Mic gain, applicable to both Handset and Handsfree.
++ Valid values : 1 to 20, Default value is 12
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
MicGain = 12
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : CallProgressTones
++ Description : Enable/Disable Call Progress Tones (Dial tone,Ringback
++ tone, Ringing tone, Busy Tone etc)
++ Valid values : CallProgressTone = 0 - Disabled
++ CallProgressTone = 1 - Enabled (Default Value)
++ Note : None
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CallProgressTones = 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : KeyToAnswer
++ Description : Key to be pressed by Remote party for answering the call.
++ Valid values : 0-9, *, #, disable (default value)
++ Note : Only applicable for Outbound Round Robin calls.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
KeyToAnswer = disable
42 Talk-A-Phone Co.