Reset To Defaults - Talk-a-Phone WEBS-PA-1 Configuration And Operation Manual

4.7.9 Reset to Defaults

The Reset to Defaults page allows the Communications Module configuration parameters to be set to
their default values. It also provides an option to retain the IP address and/or the username and
password.
Login → Maintenance → Reset to Defaults
To reset to defaults:
1 Select Network IP Address, if the IP address of the Communications Module needs to be
retained. If this option is not selected the IP address of the WEBS-PA-1 will default to
192.168.1.10.
2 Select Username and Password if the Web Interface credentials need to be retained. If the
option is not selected the username will default to admin and the password will default to
admin@123.
3 Click Apply. The Communications Module automatically reboots with the default settings.
33
1
2
Figure 17 Reset to Defaults
3
Talk-A-Phone Co.