Operating the device and sequence of reanimation
Refer to the summarised operating instructions on the packaging of the
Note
adhesive electrodes.
6.8 Plug in electrode plug
Fig. 18: Plug in electrode cable
1
Electrode plug with interlocking jack
2
Jack
Action prompt:
Before positioning the electrodes on the patient, carry out the BLS steps as
instructed!
Once the electrodes are connected to the patient and the electrode plug is
plugged in, the BLS instructions are automatically interrupted.
Insert the plug connector (1) of the electrode cable in the HeartSave socket (2).
Make sure that the locking pin (2) locks into place.
To be able to unplug the electrode plug, you have to push firmly on the top
Note
part of the locking pin while at the same time pulling the plug up.
HeartSave AED / AED-M, 21212 / GB / E02
< Plug in electrode plugs >
35