Capacity Display On The Monitor - Primedic HeartSave AED Operating Instructions Manual

Hide thumbs Also See for HeartSave AED:
Table of Contents

Advertisement

Description of device
Battery/battery pack is discharged
Device may be defective
Device defective

4.4 Capacity display on the monitor

With the HeartSave AED-M, the battery charge of the battery / AkuPak appears on
the display. The different images that may be displayed have the following meaning:
100 % charged
80 % charged
60 % charged
40 % charged
20 % charged
0% (device runs on until charge is exhausted)
Fault in the device or service life of the power module has expired
The battery and the optional AkuPak are monitored by means of electronic charge measurement
to ensure the most accurate capacity display possible. In addition to this display, all HeartSave
units issue a warning if the battery is about to be exhausted.
Audible warning
AkuPak
< Charging status battery low.
Please recharge >
Battery
< Battery low, please replace
battery >
If the device is being used, the corresponding voice prompt will be repeated regularly
in the selected language.
The battery symbol in the status display is activated.
HeartSave AED / AED-M, 21212 / GB / E02
Equipment can be used, it may be necessary to
charge or replace the battery / AkuPak.
Carry out large self-test by replacing the
battery / AkuPak or by switching the
equipment on again.
Carry out large self-test by replacing the
battery / AkuPak or by switching the
equipment on again.
Have device repaired by authorised dealer.
Display on monitor
Charge status battery low.
Please recharge
< Battery low, please replace
battery >
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Heartsave aed-m

Table of Contents