Table of Contents
Advertisement
Preparatory measures before (initial) start-up
5.5.1 Charging the PRIMEDIC
ClipCharger
Fig. 14: PRIMEDIC
1
AkuPak
2
ClipCharger
3
Mains plug
4
green LED (Power)
5
yellow LED (Charge)
Procedure:
Removing the PRIMEDIC™ AkuPak from the device.
Position the ClipCharger on the AkuPak in accordance with Fig. 14.
Now plug the mains plug into a plug socket. The green LED (Power) and the
yellow LED (Charge) light up and signal "Power Available".
Charging is started if it becomes necessary because of the remaining residual
energy. The yellow Charge LED on the ClipCharger indicates charging. Charging
time is approx. 2 1/2 hours. The yellow LED goes out when charging is complete.
Pull the mains plug out of the plug socket and release the ClipCharger from the
AkuPak.
Nickel Cadmium batteries are subject to natural wear and should be
Note
exchanged at the latest after 2.5 years depending on the frequency of use.
HeartSave AED / AED-M, 21212 / GB / E02
TM
AkuPak with the PRIMEDIC
TM
TM
AkuPak with PRIMEDIC
ClipCharger
TM
25
Advertisement
Table of Contents
