Table of Contents
Advertisement
4 Using the device
To operate the PRIMEDIC ™ HeartSave AED trainer the remote control is required.
4.1 Enable / Disable the PRIMEDIC™ HeartSave AED Trainer
4.1.1 Turn on the PRIMEDIC™ HeartSave AED Trainer
The device is automatically activated by removing its cover. If no device cover is used or if the
unit does not turn on automatically, turn it on by pressing the On / Off button.
Standby is confirmed by a beep. It is important to ensure that the loudspeaker is working.
4.1.2 Turn off the PRIMEDIC™ HeartSave AED Trainer
The PRIMEDIC ™ Heart AED Trainer can be turned off in several ways:
By pressing the on/off button for approx. 3 seconds. A warning beep will sound
•
simultaneously. This time has been chosen to avoid it being switched off
accidentally.
By pressing the "power button" on the remote control
•
4.2 Resuscitation Sequence
4.2.1 Selection of Resuscitation-Scenarios
The PRIMEDIC ™ Heart Save AED Trainer offers various so-called resuscitation scenarios
that will help you to realize different resuscitation procedures during training.
By pressing the keys 1-6 you can switch back and forth between several scenarios. The
selected scenario is announced by corresponding beeps and starts automatically. If a scenario
is not selected after the power-on tone, the trainer starts with scenario 1
The unit automatically starts in adult mode.
Press the Pediatric Button to enter Pediatric Mode.
The selected mode is signalized via the Voice Output < Adult Mode >or< Pediatric Mode > and
the LED of the Pediatric Button.
METRAX GmbH
23560 HeartSave AED Trainer / GB / B02
Using the device
15 / 24
Advertisement
Table of Contents
