Capacity Display - Primedic DefiMonitor XD Series Operating Manual

Operating Manual
1
2
3
4
5
6
4.3
20
Fig. 8 Monitor display
1 Display of operating time or Pacer parameters
2 Mode AUTO/Manual
3 ECG channel display
4 Heart frequency and alarm settings display
5 Display SpO and alarm settings display
2
6 Status line displaying patients impedance, time, micro-
phone, battery status and reports
7 Display ECG and SpO
2

Capacity Display

The charge level is shown in the display of DefiMonitor . The six possible display lev-
els mean the following:
The AkuPak is monitored with the help of an electronic charge balance to ensure the
best possible capacity display.
- In addition to this display, all DefiMonitor XD devices give a warning before the
battery is completely exhausted.
- Should the AkuPak be damaged e.g. by memory effect, this will be indicated by
the grey hatched part on the left side of the battery capacity symbol.
If the device is in use, every minute, there is a voice prompt in the selected language.
Voice Prompt
AkuPak < Accumulator charge low, please charge >
curve
100 % charged
50% discharged
Partly discharged and partly lost capacity of the AkuPak
0% (Device will run until full depletion)
DefiMonitor XD
7
Display in the Monitor
Charge the accumulator
21324 / 09.05 / 02 / GB