Front Panel - Extron electronics FOXBOX T HD-SDI User Manual

Alarm outputs connection
OVER
FIBER
RS-232 ALARM
Tx Rx G 1 2
Figure 5.
NOTE: The length of the exposed (stripped) copper wires is important (see the second
and third English language power connector

Front Panel

Extron
Figure 6.
A
Configuration port — Plug a computer or other device into the transmitter via this
USB mini-B port for remote control of the transmitter using SIS commands. See
Programming
Pin 1 and pin 2 are
shorted together when
no light is detected.
Do not tin the wires!
Alarm Connector
RATE
2.97 Gbps
CONFIG
1.485 Gbps
A A
FOXBOX T HD-SDI Transmitter Configuration Connector
Guide, beginning on page 10 for a detailed listing of SIS commands.
FOXBOX T HD-SDI Fiber Optic Transmitter • Installation and Operation
CAUTION bullets on page 6 for details).
270 Mbps
AUDIO
Unknown
FOXBOX T HD-SDI
8