Extron electronics FOXBOX T HD-SDI User Manual page 21

Command and Response Table for Matrix Switcher Commands (continued)
Command Function
Analog audio input gain and attenuation
NOTE: The set gain (G) and set attenuation (g) commands are case sensitive. The increment level, decrement level, and show level are
not case sensitive.
Set input audio gain to a +dB value
Example:
Set input audio attenuation to a -dB
value
Increment input level
Example:
Decrement input level
Show input level
Plus mode transmission
Enable Plus mode transmission
Disable Plus mode transmission
View Plus mode
Device name
Write device name
Reset device name
Show device name
X(
NOTE: = Plus mode status
X^ = Audio gain adjustment range
X&
= Audio level adjustment range
X* = Audio attenuation adjustment range
X1)
= Device name
SIS Command Response
(Host to Unit) (Unit to Host)
X^ G Aud X&]
ud+02 ]
2G
A
X* g Aud X&]
ud X&]
+G
A
Aud+03 ]
+G
Aud–01 ]
–G
X&]
G
Plus1 ]
81*1#
81*0# Plus
X(]
81#
EX1) CN }
Ipn
E CN }
Ipn
•
X1)]
E CN }
= disable Plus mode
0
to
00 10
to (in 1.0 dB steps)
–18 +10
to
00 18
Up to 24 alphanumeric characters, plus minus sign (-).
The first character must be alphanumeric; the last character cannot be a minus sign.
FOXBOX T HD-SDI Fiber Optic Transmitter • Programming Guide
Additional description
Set the input level (gain) to +
Set the input level (gain) to +2 dB.
Set the input level (attenuation) to –
Increase the audio level by 1 dB.
Increase the input level from +2 dB to
+3 dB.
Decrease the audio level from 0 dB to
–1 dB.
Enable if the inserter is connected to a
Plus mode device.
]
Disable if the inserter is connected to a
0
non-Plus-mode device.
X1)]
Assign a custom name to the transmitter.
•
SDI ]
FOXBOX T Reset the name to the factory default.
• • •HD-
Audio mute status is
= enable Plus mode (default)
1
X^
dB.
X^
dB.
X!
.
13