Huawei UPS5000-S Series User Manual page 90

UPS5000-S-(35 kVA-210 kVA)
User Manual (Singapore, 35 kVA Power Modules)
Item
Power factor
Table 4-8 Battery status
Item
Battery Status
Voltage (V)
Current (A)
Temperature (° C)
Backup time (min)
Remaining cap. (%)
SOH
Table 4-9 Total runtime
Item
Bypass runtime (h)
Inv. runtime (h)
The value must be an integer. For example:
 If the value is less than 1, the value takes 0.
 If the value is greater than or equal to 1 and less than 2, the value takes 1.
Table 4-10 Environment data
Item
Ambient temperature
(° C)
Ambient humid. (%RH)
Issue 02 (2020-01-10)
All manuals and user guides at all-guides.com
Description
Proportion of the bypass input active power to the bypass
input apparent power.
Description
The value can be Not connected, Equalized charging,
Float charging, Hibernating, discharging, or Not chg.
or dis.
Voltage of the battery string.
Current of the battery string (the current is + when
batteries are being charged and – when discharged).
Battery operating temperature (A battery sensor is
required. If the sensor is not installed, N/A is displayed).
Battery backup time estimated at the current load.
Remaining battery capacity.
State of health.
Description
Time for which the UPS runs in bypass mode.
Time for which the UPS runs in inverter mode.
Description
Temperature measured by the ambient temperature and
humidity sensor. (An ambient temperature and humidity
sensor is required. If no sensor is connected, the ambient
temperature sampled by the bypass module is displayed.)
Humidity measured by the ambient temperature and humidity
sensor. If the sensor is not installed, N/A is displayed.
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
82