Huawei UPS5000-S Series User Manual page 102

UPS5000-S-(35 kVA-210 kVA)
User Manual (Singapore, 35 kVA Power Modules)
Item
Input cur.
limiting ratio
(%)
Output Settings
Figure 4-24 Output settings
Item
Output voltage
level
Output volt.
adjustment (V)
Output
frequency (Hz)
Issue 02 (2020-01-10)
All manuals and user guides at all-guides.com
Description
Limits the input current to protect
the D.G.
Description
Specifies the system output
voltage level. This parameter is
configurable only after the
inverter shuts down. After you
change the voltage level, the
upper limit of the bypass voltage
restores to the default value. (If
the voltage level is 380 V or 400
V, the default upper limit is
+15%. If the voltage level is 415
V, the default upper limit is
+10%.)
The output voltage can be
slightly adjusted based on the
onsite power distribution
condition to ensure a minimum
difference between the output
voltage and the bypass voltage
and facilitate uninterruptible
power supply when the UPS
transfers from normal mode to
bypass mode.
Specifies the system output
frequency level.
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
Default Value Value Range
200% 50%–200%
Default Value Value Range
400 380, 400, 415
The default 380 V: 209.0–
value is 220.0, 231.0
230.0, and 240.0
400 V: 218.5–
when the
241.5
voltage level is
415 V: 228.0–
380 V, 400 V,
252.0
and 415 V
respectively.
50 Hz 50 Hz, 60 Hz
94