Preface - Siemens SIMATIC HMI IPC577C Operating Instructions Manual

Preface

Purpose of the Operating Instructions
These operating instructions contain all the information you need for commissioning and
operation of the SIMATIC HMI IPC577C.
It is intended both for programming and testing personnel who commission the device and
connect it with other units (automation systems, programming devices), as well as for service
and maintenance personnel who install add-ons or carry out fault/error analyses.
Basic knowledge required
A solid background in personal computers and Microsoft operating systems is required to
understand this manual. General knowledge in the field automation control engineering is
recommended.
Scope of the operating instructions
These operating instructions are valid for all devices with order numbers 6AV7 885-... and
describes the state of delivery as of October 2010.
Approbations
Information is available in the appendix in Certificates and Approvals (Page 182) .
CE marking
Information is available in the appendix in Guidelines and Declarations (Page 181) .
Standards
For additional information, refer to chapters Application planning (Page 29) and Technical
specifications (Page 125).
Position in the information landscape
The documentation for the HMI IPC includes the following sections:
● SIMATIC HMI IPC577C, Operating Instructions (Compact)
● SIMATIC HMI IPC577C, Operating Instructions
The documentation is supplied in German and English with the HMI IPC in electronic form as
a PDF file on the "Documentation and Drivers" CD/DVD.
SIMATIC HMI IPC577C
Operating Instructions, 10/2010, A5E02368074-02
1
9