Table of Contents
Advertisement
12.6
Data backup
12.6.1
Creating an image
Data backup in Windows Embedded Standard / Windows XP Professional / Windows 7
To backup data in Windows Embedded Standard / Windows XP Professional / Windows 7, it
is recommended to use the "SIMATIC IPC Image & Partition Creator" software tool. This tool
provides simple and efficient functions for backup and restoring the full content of Compact
Flash cards, of HDDs and of individual partitions (images).
The software can be ordered from the Siemens A&D online ordering system. For more
information about "SIMATIC IPC Image & Partition Creator", refer to the corresponding
product documentation.
12.7
Installing drivers and software
12.7.1
Installing drivers for Windows Embedded Standard 2009 and Windows
Embedded Standard 7
Install the drivers for Windows Embedded Standard 2009 or Windows Embedded Standard 7
as for Windows XP Professional or Windows 7. Observe the Setup instructions of the driver
manufacturer.
During driver installation in Windows Embedded Standard 2009, Setup may prompt you to
insert the Windows XP Installation CD or SP2 CD.
In this case, insert the Restore DVD. The required files are in the \Drivers_XPE folder.
12.7.2
Installation of driver and software
NOTICE
Before you install new drivers or updates for multilingual operating systems, (MUI versions),
reset the regional settings for menus and dialogs and the default language to US English.
Install the drivers and software from the included "Documentation and Drivers" CD.
Procedure:
1. Insert the CD/DVD into the drive.
2. Start the program with "START".
3. Select "Drivers & Updates" from the index.
SIMATIC HMI IPC577C
Operating Instructions, 10/2010, A5E02368074-02
Maintenance and Service
12.6 Data backup
119
Advertisement
Table of Contents
