Key Panel Configuration - Siemens SIMATIC HMI IPC577C Operating Instructions Manual

Commissioning
8.6 Setting the panel type
Note
On-screen keyboard (OSK)
 If the "enable" checkbox is selected, the Windows on-screen keyboard is displayed for
 If you clear the checkbox, the on-screen keyboard is not displayed.
 In Windows 7, the on-screen keyboard is not displayed until a password is assigned to
3. Use the "Finish" button to close the wizard. The HMI device will be restarted automatically
8.6.3

Key panel configuration

1. Follow all dialogs until the end.
2. Click "Finish".
Note
On-screen keyboard (OSK)
 If the "enable" checkbox is selected, the Windows on-screen keyboard is displayed for
 If you clear the checkbox, the on-screen keyboard is not displayed.
 In Windows 7, the on-screen keyboard is not displayed until a password is assigned to
1. Use the "Finish" button to close the wizard.The HMI device will be restarted automatically
68
logon at every program start. You can use this keyboard to enter the administrator
password, for example. An external keyboard is then not necessary.
the user account.
for the respective configuration.
logon at every program start. You can use it, for example, to enter the administrator
password. An external keyboard is then not necessary.
the user account.
for the respective configuration.
SIMATIC HMI IPC577C
Operating Instructions, 10/2010, A5E02368074-02