Installing Or Updating Application Programs And Drivers; Performing A Bios Update - Siemens SIMATIC HMI IPC577C Operating Instructions Manual

Maintenance and Service
12.5 Installing updates
Other operating systems
Please contact the corresponding manufacturer.
12.5.2

Installing or updating application programs and drivers

To install software for Windows Embedded Standard / Windows XP Professional /
Windows 7 from CD or floppy disk, connect a corresponding external USB drive to the
computer.
The drivers for USB floppy drives and CD-ROM drives are included in
Windows Embedded Standard / Windows XP Professional / Windows 7 and do not have to
be installed from other sources.
For information about installation of SIMATIC software packages, refer to the respective
manufacturer documentation.
For updates of drivers and application programs from third-party manufacturers, contact the
respective manufacturer.
NOTICE
Before you install new drivers or operating system updates at Windows XP Professional
MUI versions, the regional settings for menus and dialogs and the default language have to
be reset to US English.
12.5.3

Performing a BIOS update

Download from BIOS update
Check regularly if updates are available for download to your device.
You can find the downloads in the Internet (http://www.siemens.com/asis) in the "Support"
tab under "Tools & Downloads"´. Using the global search function, you can then also search
for any downloads you require.
118
SIMATIC HMI IPC577C
Operating Instructions, 10/2010, A5E02368074-02