Siemens SIMATIC HMI IPC577C Operating Instructions Manual page 36

Installing/Mounting
5.1 Installation guidelines
● Avoid extreme ambient conditions. Protect your device against dust, moisture and heat.
● Install the device in such a way that it poses no danger, for example, by falling over.
● During assembly, please comply with the approved installation positions.
● Position the screen in an ergonomic position favorable to the user. Choose a suitable
● Position the screen so that it is not subject to direct sunlight or other strong sources of
Additional information is available in the section Dimension drawings (Page 137).
36
NOTICE
If you mount the device in an impermissible installation position or you do not observe
the environmental conditions (see chapter Technical specifications (Page 125)), you
endanger the product safety provided by the UL-approval and compliance with the low-
voltage directive (via EN 60950-1). In additional, the functionality of the device is no
longer guaranteed.
WARNING
Function test while installing the device in machines or execute systems
Following the results of a risk analysis, additional protection equipment on the machine
or the system is necessary to avoid endangering persons. With this, especially the
programming, configuration and wiring of the inserted peripherals have to be executed,
in accordance with the safety performance (SIL, PL or Cat.) identified by the necessary
risk analysis. The intended use of the device has to be ensured.
The proper use of the device has to be verified with a function test on the system. This
test can detect programming, configuration and wiring errors. The test results have to be
documented and if necessary inserted into the relevant inputs.
installation height.
light.
SIMATIC HMI IPC577C
Operating Instructions, 10/2010, A5E02368074-02