Checking The Language Selection - Siemens SIMATIC HMI IPC577C Operating Instructions Manual

3. Select
4. Select the operating system in
5. Install the required driver.
8.5

Checking the Language Selection

You can have the languages currently set and their ID numbers displayed by using the
"CheckLanguageID" tool. These include:
● SystemDefaultLangID: System language
● UserDefaultLangID: Standard language
● UserDefaultUILangID: User interface language
Checking the Language Selection
Call up the "CheckLanguageID" tool by using c:\drivers\checklang\checklangid.exe.
NOTICE
All three languages displayed should have the same ID assigned. If this is not the case,
change the language selection as described in the section "Setting Up the Language
Selection".
SIMATIC HMI IPC577C
Operating Instructions, 10/2010, A5E02368074-02
Drivers & Updates
NOTICE
Once you completed installation of a new Windows 7, always install the chipset driver
before you install any other drivers.
Note
This tool is only installed for the hard disk variants on devices running Windows
Embedded Standard 2009, Windows Embedded Standard 7, or Windows XP
Professional.
from the index.
Drivers & Updates
8.5 Checking the Language Selection
.
Commissioning
65