Tape drive cable routing
Use the section to understand the cable routing for the tape drive.
SAS tape drive
From
Power connector on signal cable
1
Signal connector on tape drive
2
Notes:
• Connections between connectors;
• When routing the cables, ensure that all cables are routed appropriately through the cable guides and
cable clips.
• The following illustrations show the cable routing for PCIe slot 1 and 9 respectively, the routing for the
other PCIe slots are similar.
Figure 32. Cable routing for SAS tape drive to PCIe slot 1
ThinkSystem ST650 V2 Maintenance Manual
54
To
Power distribution board: ODD power connector
An available connector on the RAID/HBA adapter
↔
↔
↔
,
,
, ...
1
1
2
2
3
3
n
↔
n