Table of Contents
Advertisement
Location of the external LCD diagnostics handset
Location
The external LCD diagnostics handset is connected to the
server with an external cable.
Note: When unplugging the external handset, see the following instructions:
Press the plastic clip on the plug forward.
Hold the clip and remove the cable from the connector.
Display panel overview
The diagnostics device consists of an LCD display and 5 navigation buttons.
ThinkSystem ST650 V2 Maintenance Manual
28
Callouts
External LCD diagnostics handset
1
Magnetic bottom
2
With this component, the diagnostic handset can be
attached to the top or side of the rack or chassis with
hands spared for service tasks.
External diagnostics connector
3
This connector is located on the rear of the server, and is
used to connect an external LCD diagnostics handset.
Advertisement
Table of Contents
