Table of Contents
Advertisement
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://youtube.com/playlist?list=PLYV5R7hVcs-DoEcxrm2zKNpaKOdZ3f8Qc
• Youku:
https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1.
Make preparations for this task.
a.
Remove the server cover. See "Remove the server cover" on page 188.
b.
Remove all the flash power modules. See "Remove a flash power module" on page 98.
c.
Remove the air baffle. See "Remove the air baffle" on page 72.
d.
Remove all the full-length GPU adapters. See "Remove a full-length GPU adapter" on page
113.
e.
Remove all the fans. See "Remove a hot-swap fan" on page 93.
f.
Remove the fan cage. See "Remove the fan cage assembly" on page 95.
Step 2.
Remove the memory module from the slot.
Figure 100. Memory module removal
a.
Open the retaining clip on each end of the memory module slot.
Attention: To avoid breaking the retaining clips or damaging the memory module slots, handle
the clips gently.
b.
Grasp the memory module at both ends and carefully lift it out of the slot.
After you finish
• Install a memory module filler or a new memory module to cover the slot. See "Install a memory module"
on page 139.
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
ThinkSystem ST650 V2 Maintenance Manual
138
Advertisement
Table of Contents
