Table of Contents
Advertisement
Note: All the drive bays must be occupied. This means that each bay must have a drive or drive filler
installed.
2. Close the front door; then, use the key to lock the server cover.
3. Check the drive activity LED on the front panel to verify that the drive is operating correctly.
Simple-swap drive
activity LED
Solid on
Off
4. Use the Lenovo XClarity Provisioning Manager to configure the RAID if necessary. For more information,
see:
http://sysmgt.lenovofiles.com/help/index.jsp?topic=%2FLXPM%2FRAID_setup.html
5. Complete the parts replacement. See "Complete the parts replacement" on page 206.
Remove a hot-swap drive
Use this information to remove a hot-swap drive.
About this task
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Attention:
• Read "Installation guidelines" on page 57 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Before removing a hot-swap drive:
• Ensure that you have back up data on your drive, especially if it is part of a RAID array.
• Before you make changes to drives, RAID adapters, drive backplanes, or drive cables, back up all
important data that is stored on the drives.
• Before you remove any component of a RAID array, back up all RAID configuration information.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://youtube.com/playlist?list=PLYV5R7hVcs-DoEcxrm2zKNpaKOdZ3f8Qc
• Youku:
https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1.
Use the key to unlock the server cover; then, open the front door.
Description
Color
The simple-swap drive is active.
Green
None
The simple-swap drive is not active.
.
Chapter 4
Hardware replacement procedures
83
Advertisement
Table of Contents
