Chapter 1. Introduction
The ThinkSystem ST650 V2 server is a 4U tower server designed for performance and expansion for various
IT workloads. With the modular design, the server is flexible to be customized for maximum storage capacity
or high storage density with selectable input/output options and tiered system management.
Performance, ease of use, reliability, and expansion capabilities were key considerations in the design of the
server. These design features make it possible for you to customize the system hardware to meet your needs
today and provide flexible expansion capabilities for the future.
The server comes with a limited warranty. For details about the warranty, see:
en/solutions/ht503310
For details about your specific warranty, see:
Server form factor
The ThinkSystem ST650 V2 server is designed to support both tower and rack form factors.
You can change the server from tower form factor to rack form factor by installing the tower to rack
conversion kit. For instructions on how to install the tower to rack conversion kit, refer to "Install the tower to
rack conversion kit" in the ThinkSystem ST650 V2 Setup Guide.
Specifications
The following information is a summary of the features and specifications of the server. Depending on the
model, some features might not be available, or some specifications might not apply.
Table 1. Specifications
Specification
Dimension
Weight (depending on the
configuration)
© Copyright Lenovo 2021
http://datacentersupport.lenovo.com/warrantylookup
Description
4U server
• Height:
– Without foot stand: 448 mm (17.64 inches)
– With foot stand: 461.4 mm (18.17 inches)
• Width:
– Without foot stand: 174.2 mm (6.86 inches)
– With foot stand: 247.4 mm (9.74 inches)
• Depth:
– Without front door: 710.8 mm (27.98 inches)
– With front door: 733.8 mm (28.89 inches)
• 2.5-inch drive configuration:
– Maximum: 39.28 kg (86.60 lb)
• 3.5-inch drive configuration:
– Maximum: 46.23 kg (101.92 lb)
https://support.lenovo.com/us/
1