Placement; Minimum Clearance To Unit; Distance To Walls - Rational iVario 2-XS Original Installation Manual

5 | Placement

5 Placement
Risk of crushing when positioning the unit
Fingers, hands and feet could be crushed beneath the unit.
Wear appropriate protective clothing when positioning the unit.
n
Only lift the unit at the intended lifting points.
n
Pre-requisites
When placing the unit on a base frame, be sure to only use the original
n
base frame of the unit manufacturer.
5.1

Minimum clearance to unit

Minimum clearance not adhered to
Place the unit with the minimum clearance to heat sources or open fire
required to prevent any damage to the unit or malfunctions.
Damage to the wall on the rear side of the unit
Water or steam can escape from the safety overflow. Observe this note
during installation and check the condition of the wall on the rear side of
the unit.

5.1.1 Distance to walls

There is no minimum clearance on the unit rear.
a
The walls at the place of installation must be built according to local fire
protection regulations and must be resistant to heat sources.
1. Keep a minimum distance to walls to both the left and right.
22 / 56
CAUTION
NOTICE
NOTICE
80.06.562_IM_2-XS_ 2-S_en-INT