Placement; Minimum Clearance To Unit; Distance To Walls - Rational iVario Pro L Original Installation Manual

5 | Placement

5 Placement
Risk of crushing when positioning the unit
Fingers, hands and feet could be crushed beneath the unit.
Wear appropriate protective clothing when positioning the unit.
n
Only lift the unit at the intended lifting points.
n
Pre-requisites
If you do not place the device on plastic feet by default, follow the instruc-
n
tions and steps in the chapter Installation options.
5.1

Minimum clearance to unit

Minimum clearance not adhered to
Place the unit with the minimum clearance to heat sources or open fire
required to prevent any damage to the unit or malfunctions.
Damage to the wall on the rear side of the unit
Water or steam can escape from the safety overflow. Observe this note
during installation and check the condition of the wall on the rear side of
the unit.

5.1.1 Distance to walls

There is no minimum clearance on the unit rear.
a
The walls at the place of installation must be built according to local fire
protection regulations and must be resistant to heat sources.
1. Keep a minimum distance to walls on the left side.
24 / 60
CAUTION
NOTICE
NOTICE
80.06.561_iVario Pro L_XL_IM_V01_en-INT