A
Main input A
• 200-240 VAC, 10 A for CP4445-RGB
• 200-240 VAC, 13 A for CP4455-RGB
B
Main input B (200-240 VAC, 8 A)
• 200-240 VAC, 8 A for CP4445-RGB
• 200-240 VAC, 8 A for CP4455-RGB
C
UPS circuit breaker
D
UPS inlet
• 100-240 VAC, 5 A for CP4445-RGB
• 100-240 VAC, 5 A for CP4455-RGB
E
Main input circuit breakers (A and B)
1. Remove the rear cover of the projector by unscrewing the six screws.
2. On the back right side of the projector, remove the eight screws holding the two AC receptacle
knockout plates and then remove the two plates.
CP4445-RGB and CP4455-RGB Installation and Setup Guide
020-103746-01 Rev. 1 (11-2022)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up
29