Table of Contents
Advertisement
2. Unlock the horizontal and vertical lock screws (locks B, C, and E).
B
Horizontal lock screw (lock A)
C
Horizontal lock screw (lock B)
E
Vertical lock screw (lock C)
F
Vertical boresight screw
A
Horizontal boresight screw
D
Manual focus knob
3. Open the shutter on the projector.
4. In the right toolbar, select Test Patterns
5. Select the RGB-4K-Boresight pattern and display it full screen.
Make sure the Uncorrected Color Box option is selected.
CP4445-RGB and CP4455-RGB Installation and Setup Guide
020-103746-01 Rev. 1 (11-2022)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
.
Adjusting the image
85
Advertisement
Table of Contents
