Table of Contents
Advertisement
4. Turn the clamp on the lens mount to the open position.
5. Fully insert the lens into the lens mount opening without turning, until it reaches the stop
position.
6. Connect the lens zoom motor to the two zoom motor harness connectors.
7. Lock the lens assembly in place by rotating the lens clamp downward.
CP4445-RGB and CP4455-RGB Installation and Setup Guide
020-103746-01 Rev. 1 (11-2022)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up
34
Advertisement
Table of Contents
