Save TCP/IP settings
–
Vivid S70 / S60
User Manual
BC092760-1EN 01
The TCP/IP settings of the system need to be saved after a
software upgrade.
1. Press Utility/Config on the Control Panel.
2. Select the Connectivity category and TCP/IP subgroup.
The TCP/IP settings window is displayed (Figure 15-5).
Figure 15-5. TCP/IP settings
3. Press Save settings.
4. Reboot the system.
5. The software upgrade is complete. If you have any
questions or concerns, please call your GE service
organization.
Software update
15-13