File Handling - GE Vivid S70 User Manual

On-system

File handling

Off-system directory structure
–
Vivid S70 / S60 User Manual
BC092760-1EN 01
Figure 12-62. Scan Assist Pro Creator screen
1. Press Protocol on the Control panel and Config on the
Touch panel. Log on if required.
The Scan Assist Pro sheet is displayed (Figure 12-59,
page 12-76).
2. To edit an existing Protocol, select the Protocol in the
Available Protocols field on the left-hand side of the Scan
Assist Pro sheet.
3. Select Edit to start the Scan Assist Pro Creator.
When using Scan Assist Pro Creator off-system, it is important
to organize the Protocols in a way that will make it easy to
import them onto the system. All Protocols must be stored in a
VIVID_SCAN_ASSIST directory. Within this directory, one or
more user-specified directories can be created. Within each of
these user-specified directories are the category directories
(Abdominal, Cardiac, etc.) that hold the actual Protocols.
To specify the directory structure:
1. In the Scan Assist Pro Creator, select File/Directory.
The Directory configuration window is displayed.
Scan Assist Pro Creator
12-79