Using Multi-Plane Mode; Bi-Plane Prepare - GE Vivid S70 User Manual

Hide thumbs Also See for Vivid S70:

Table of Contents

Using Multi-plane mode

Vivid S70 / S60

BC092760-1EN 01

1. Select a 4D probe and a cardiac application.

2. Press Multi D on the control panel.

The Bi-plane screen is displayed.

3. Press Tri-plane or Bi-plane on the control panel to activate

the corresponding mode.

4. Adjust the angle increment between the scan planes, or the

overall rotation (see page 6-41).

5. If in Bi-plane mode, adjust the scan plane 2 tilt angle (see

6. To activate another scanning mode:

Press Color to activate CF mode.

Press TVI to activate TVI mode.

In TVI mode, press either TSI, Tissue Tracking, Strain

or Strain rate to activate alternative tissue Doppler

To start 4D acquisition, select one of the 4D acquisition

presets on the Touch panel (Medium, Large or 4D Zoom

7. Zoom in the structure of interest (see page 6-42).

Scan plane rotation or tilting cannot be done when in zoom

8. Press Store to save the acquisition.

Bi-plane prepare is a 4D scanning mode intended to be used for

entering Bi-plane from within a 4D acquisition. The trackball is

used to position two cut-planes according to structures that are

visualized in the volume rendering. Pressing Bi-plane on the

Touch panel enters the Bi-plane acquisition mode, keeping the

cut-planes shown in the 4D mode, but with higher resolution and

Multi-plane mode