Measurement Package - GE Vivid S70 User Manual

Hide thumbs Also See for Vivid S70:

Table of Contents

Basic operations

Opening the Measurement configuration package

Display of the Measurement categories

Moving an item in the Measurement menu

Vivid S70 / S60

BC092760-1EN 01

Measurement Package

There are many more measurements and parameters in the

measurement package than shown in the default Measurement

menu. Use the configuration system to set up the

measurements that should be available in the Measurement

menu and which parameters should be calculated.

A list of all cardiac calculations with needed measurements and

location in the Measurement package can be found in the

Reference manual.

1. Press Utility/Config on the Touch panel and select the

category Measure/Text.

The Measurement menu sheet is displayed (Figure 12-10).

1. Press M&A categories in the Configuration window.

The M&A categories are displayed in a pop-up window.

2. Check the categories to be displayed.

Uncheck the categories to hide.

To select a Measurement category in the Measurement menu:

1. Select the heading of the Measurement menu.

The measurement categories are displayed in a sub-menu.

2. Select the Measurement category to display.

1. Select an entry in the Measurement menu.

the Measurement menu.

to move the selection up or down inside