GE Vivid S70 User Manual page 425

Diagnosis code
Adding Diagnosis codes
Removing entered Diagnosis codes
Creating a Diagnosis code
–
Vivid S70 / S60 User Manual
BC092760-1EN 01
Retrieving and editing archived information
1. In the Patient info and exam screen, press
Code field.
The Code list is displayed.
2. Select the codes to enter.
The codes selected are displayed in the Patient info and
exam screen.
1. In the Patient info and exam screen, press
Code field.
The Code list is displayed.
2. Uncheck the codes to remove.
1. In the Patient info and exam screen, press
Code field.
The Code list is displayed.
2. Select New code.
The New code window is displayed.
3. Enter the new code.
4. Press OK to exit.
Diagnostic codes can also be created and deleted from the
configuration package:
1. Press Utility/Config on the Touch panel to access the
configuration package.
2. In the Configuration package, select the category Report
and the Tab sheet Diag. Codes.
Figure 10-12. The Diagnostic codes sheet
next to the
next to the
next to the
10-23