GE Vivid S70 User Manual page 276

Hide thumbs Also See for Vivid S70:

Table of Contents

Adding/deleting levels and projections

Scan mode selection

Display timer(s)

Start analysis automatically

Smart stress

1. Enter the number of levels and projections in the Grid size

field (see Figure 7-12).

The new grid size is displayed in the Protocol template

preview field.

2. Press New Template to create a new template.

Press Save Template to update the base template.

Factory templates cannot be changed.

1. From the Scan mode drop-down menu, select a scan mode

to be associated to the actual column (projection).

1. Check the box(es) to display timer(s) as specified (see

Figure 7-12).

1. Check Auto start analysis to display the Stress Echo

Analysis screen when the last acquisition is performed.

1. Check Crop images to enable display cropping of images

recorded as part of the protocol.

Cropping can be turned off for individual cells of the protocol

acquisition by using the Crop button on Touch panel.

Check Smart stress to store a subset of the image acquisition

settings (e.g. geometry, zoom, gain, compress, reject,

power...etc) for each view in the protocol. Smart Stress enables

to set image acquisition settings for each view at baseline level

and automatically get the same image settings in the

corresponding views in the next levels. If you want to use Smart

stress in Continuous capture, you need to use the arrow buttons

to indicate to the system when you are switching views.

Vivid S70 / S60

BC092760-1EN 01