GE Vivid S70 User Manual page 221

Hide thumbs Also See for Vivid S70:

Table of Contents

Vivid S70 / S60

BC092760-1EN 01

2. Place the cursor at one of the extremities of a cut-plane

intersection line in one of the cut-planes. The cursor is

. Drag to rotate the cut-plane.

3. Place the cursor in the middle section of a cut-plane

intersection line. The cursor is changed to

translate the cut-plane.

4. Place the cursor at the intersection between two cut-plane

lines. the cursor is changed to

translated simultaneously.

5. Click on a point in the volume rendering to move the

intersection of the two other cut-planes to that location.

If Depth Mode is turned on: the reference plane is also

moved inside the volume rendering to the

corresponding selected depth.

If Depth Mode is turned off: the reference plane is kept

at the current depth.

6. Place the cursor at the outer area of one of the cut-planes.

The cursor is changed to

image. The cut-plane lines remain fixed.

7. Place the cursor in the inner area of one of the cut-planes.

The cursor is changed to

image. The cut-plane lines remain fixed.

1. Rotate the Zoom knob clockwise on the control panel.

The volume rendering is magnified.

4D Views enables quick access to standard 2D and 4D views.

4D Views requires slice alignment before standard views can be

4D Views is available in Freeze and replay.

1. Press 4D Views on the control panel.

The Slice alignment screen is displayed.

. Both cut-planes are

. Drag to rotate the cut-plane

. Drag to pan the cut-plane