Foreword; Purpose Of This User Manual; Hardware And Software Requirements - Phoenix Contact ILC 131 ETH Installing And Operating Information

1

Foreword

HW/SW
Inline controller
Parameterization
memory, plug-in data, see Sec-
tion "Accesso-
Ethernet cable
Connecting cable
Automation software versions (Service Pack = SP)
PC Worx
PC Worx Express
* Part of the AUTOMATIONWORX Software Suite 2012 1.70
** Part of the AUTOMATIONWORX Software Suite 2012 1.70 Service Pack 1
8385_en_02
1.1

Purpose of this user manual

This user manual helps you to start up and operate the following Inline controllers:
– ILC 131 ETH,
– ILC 151 ETH,
– ILC 171 ETH 2TX,
– ILC 191 ETH 2TX,
– ILC 131 ETH/XC or
– ILC 151 ETH/XC.
1.2

Hardware and software requirements

For ordering For ordering
data, see Sec-
tion "Accesso-
ries" on ries" on
page 95 page 95
Ethernet cable for connecting the Inline controller to a PC
Connecting cable for connecting the Inline controller to a PC (RS-232 cable, optional)
≥ 6.20 * ≥ 6.20 *
≥ 6.20 * ≥ 6.20 *
For the ordering data for hardware, software, and additional documentation, please refer
to Section "Technical data and ordering data" on page 87.
PROFINET device function
The PROFINET device function of the controllers is not supported by the
PC Worx Express software.
Description
For ordering For ordering
data, see Sec- data, see Sec-
tion "Accesso- tion "Accesso-
ries" on ries" on
page 95 page 95
≥ 6.20 SP 1 ** ≥ 6.20 SP 1 **
≥ 6.20 SP 1 ** ≥ 6.20 SP 1 **
Foreword
For ordering For ordering
data, see Sec- data, see Sec-
tion "Accesso- tion "Accesso-
ries" on ries" on
page 95 page 95
≥ 6.20 * ≥ 6.20 *
≥ 6.20 * ≥ 6.20 *
PHOENIX CONTACT
9