Diagnostics And Status Indicators - Phoenix Contact ILC 131 ETH Installing And Operating Information

PLC/PWR
PN
Des. Color
ETH: state of the Ethernet interface
(applies to both interfaces (X2.1, X2.2) for the ILC 171 ETH 2TX/ILC 191 ETH 2TX)
LNK Green
ACT Yellow
PN: PROFINET
(for ILC 131 ETH(/XC) and ILC 151 ETH(/XC) from HW version 0.1 or later and FW version 4.10 or later)
BF Red
8385_en_02
2.6

Diagnostics and status indicators

The descriptions for diagnostic and status indicators apply to all the Inline controllers
listed on the inner cover page of this user manual.
The diagnostics and status indicators are used for quick local error diagnostics.
FR
BF
DIA
UL FF
US BF
UM SF
ETH
Figure 2-8
Local diagnostics and status indicators
Status Meaning
Off Connection not established successfully
Connection established successfully (link): the Inline controller is able to contact an-
On
other network device.
Off Data transmission inactive
On Data transmission active (activity): the Ethernet interface is sending or receiving data
Status of PROFINET communication/communication error (BusFail)
The higher-level PROFINET controller has established an active communication con-
Off
nection to the PROFINET device.
The PROFINET device has not established an active communication connection to a
On
higher-level PROFINET controller.
The higher-level PROFINET controller establishes a communication connection to the
Flashing
PROFINET device.
LNK ACT
Diagnostics and status indicators
Description of the Inline controller
P F
B S A
F A IL
I 6
R D Y
1
I 5
I 8
E I 7
I 2
I 1
I 4
F R
I 3
Q 2
Q 1
F F
Q 4
U L
Q 3
U S
RDY FAIL
U M
I1 I2
I3 I4
E
O1
Q1 Q2
Q3
Q4
6
PHOENIX CONTACT
I2
BSA PF
I5 I6
I7 I8
I1
8385C008
21