3
The Inline controller under PC Worx/PC Worx Express
8385_en_02
3.1
Software version
Using the Inline controller requires the following PC Worx/PC Worx Express version or later:
Table 3-1
Software version information
Inline controller
ILC 131 ETH
ILC 151 ETH
ILC 171 ETH 2TX
ILC 191 ETH 2TX
ILC 131 ETH/XC
ILC 151 ETH/XC
PROFINET device function
The PROFINET device function of these controllers is not supported by the
PC Worx Express software.
For information on installing and using PC Worx/PC Worx Express, please refer to the
corresponding quick start guide. It can be downloaded at
and is supplied with the software.
The Inline controller under PC Worx/PC Worx Express
Firmware version
Software versions (Service Pack = SP, Hotfix = HF)
≥ 6.20
≥ 6.20
≥ 6.20 SP 1
≥ 6.20 SP 1
≥ 6.20
≥ 6.20
≥ 4.0
2012 1.70
2012 1.70
2012 1.70 SP 1
2012 1.70 SP 1
2012 1.70
2012 1.70
phoenixcontact.net/products
PHOENIX CONTACT
43