Connection And Operating Elements - Phoenix Contact ILC 131 ETH Installing And Operating Information

ILC 131 ETH,
ILC 151 ETH,
ILC 131 ETH/XC,
ILC 151 ETH/XC
8385_en_02
2.5

Connection and operating elements

1
2
3
4
5
6
Figure 2-6 Structure of the Inline controller (ILC 131 ETH, ILC 151 ETH,
ILC 131 ETH/XC, ILC 151 ETH/XC; shown in the figure: ILC 151 ETH)
The Inline controller consists of the following components:
1 Electronics base
2 Slot for the parameterization memory/card holder (SD card)
The SD card is not supplied as standard with the Inline controller.
Please refer to the ordering data in Section "Accessories" on page 95.
3 Mode selector switch
4 Reset button
5 RS-232 interface
6 Ethernet connection
7 Connector 1: terminal points for voltage supply
8 Connector 2: output terminal points
9 Connectors 3 and 4: input terminal points
10 Diagnostics and status indicators
11 End plate
Description of the Inline controller
11
9
8
7
8385B006
10
PHOENIX CONTACT
19