ILC 1X1
34
PHOENIX CONTACT
2.12.2
Serial PRG interface (mini-DIN socket)
In addition to providing the Ethernet interface, this serial interface enables communication
with the Inline controller from a PC.
A connecting cable is required for direct connection of the Inline controller to a PC with
PC Worx via the serial PRG interface. Connect the connecting cable to the programming in-
terface of the Inline controller (PRG designation) and the serial interface of the PC.
This interface can be used to either assign the IP address of the Inline controller and to
access the Inline controller using the Diag+ diagnostics tool or to communicate with spe-
cial I/O devices via function blocks (see Section 2.12.3, "Serial PRG interface - function
blocks").
The Inline controller cannot be programmed via the RS-232 interface.
Assembly instruction
1
2
4
Figure 2-20
Connecting cable between PC and Inline controller
Ordering data:
Connecting cable for connecting the Inline controller to a PC (RS-232) for PC Worx,
length 3 m (Designation COM CAB MINI DIN, Order No. 2400127).
2
3
5
P F
B S A
1
F A IL
R D Y
I6
1
I5
I8
E
I7
I2
I1
I4
F R
Q 2
I3
Q 1
F F
Q 4
U L
Q 3
U S
U M
8385B013
8385_en_02