Possible Fields Of Application Of The Inline Controller; Ilc 131 Eth And Ilc 131 Eth/Xc; Ilc 151 Eth, Ilc 151 Eth/Xc, Ilc 171 Eth 2Tx, And Ilc 191 Eth 2Tx - Phoenix Contact ILC 131 ETH Installing And Operating Information

Inline local bus
Inline local bus
8385_en_02
2.2 Possible fields of application of the Inline control-
ler
2.2.1

ILC 131 ETH and ILC 131 ETH/XC

The Inline controllers (ILC 131 ETH/ILC 131 ETH/XC) can be used as a distributed control-
ler of an Inline station, which is connected to an Ethernet system. An Inline local bus
(Figure 2-1) can then be connected to the Inline controller.
ILC 131 ETH
Order-No.: 2700973
HW/FW: xx/xxx
FR E RDY FAIL BSA PF
MAC Addr.: xx.xx.xx.xx
UL FF
AUTOMATIONWORX
US Q1 Q2 I1 I2 I5 I6
UM Q3 Q4 I3 I4 I7 I8
MRESET
STP
RUN / PROG
X1
RESET
PRG
LNK ACT
X2
Ethernet
Figure 2-1 Connected Inline local bus
Please note: the Inline controllers (ILC 131 ETH / ILC 131 ETH/XC) do not support con-
nection of the INTERBUS remote bus.
2.2.2 ILC 151 ETH, ILC 151 ETH/XC, ILC 171 ETH 2TX, and
ILC 191 ETH 2TX
The Inline controllers (ILC 151 ETH/ILC 151 ETH/XC/ILC 171 ETH 2TX/ILC 191 ETH 2TX)
can be used as a distributed controller of an Inline station, which is connected to an Ethernet
system. A single Inline local bus (Figure 2-2) as well as a INTERBUS system with a maxi-
mum of 4 remote bus levels (Figure 2-3) can be connected to the Inline controller.
ILC 151 ETH
Order-No.: 2700974
HW/FW: xx/xxx
FR E RDY FAIL BSA PF
MAC Addr.: xx.xx.xx.xx
UL FF
AUTOMATIONWORX
US Q1 Q2 I1 I2 I5 I6
UM Q3 Q4 I3 I4 I7 I8
MRESET
STP
RUN / PROG
RESET
PRG
LNK ACT
Ethernet
Figure 2-2 Connected Inline local bus
8385B001
8385B002
Description of the Inline controller
PHOENIX CONTACT
13