Creating A New Project - Phoenix Contact ILC 131 ETH Installing And Operating Information

ILC 1X1
44
PHOENIX CONTACT
3.2

Creating a new project

Before making the settings described below, create a new project in the
PC Worx/PC Worx Express software.
• Select the "New Project..." command from the "File" menu to create a new project using
a template.
• In the "New Project" dialog, select the "ILC 1..." template according to the version of the
Inline controller you are using.
• Save the project using an appropriate name (in the example in Figure 3-1:
"UM_ILC_1X1").
Figure 3-1 Project information after creating a new project
8385_en_02