Inserting/Removing The Parameterization Memory - Phoenix Contact ILC 131 ETH Installing And Operating Information

ILC 1X1
Inserting the SD card
Removing the SD card
26
PHOENIX CONTACT
2.9.1

Inserting/removing the parameterization memory

A
>Click<
Figure 2-10 Inserting (A) and removing (B) the parameterization memory
The Inline controller has an SD card holder with push/push technology.
• Insert the parameterization memory (SD card) into the slot as shown in Figure 2-10 (A).
• Gently push the parameterization memory into the slot until it engages with a click in the
card holder.
• Gently push the parameterization memory into the slot in the direction shown in
Figure 2-10 (B) until the snap-on mechanism releases the parameterization memory
and partially ejects it from the slot. Remove the parameterization memory.
For additional information on the parameterization memory, please refer to Section "Func-
tions of the plug-in parameterization memory (SD card)" on page 56 and Section "Param-
eterization memory and Internet Explorer" on page 62.
B
P F
1 B S A
F A IL
1 R D Y I6
I5
I8
E
I7
I2
I1
I4
F R
I3
Q 2
Q 1
F F
Q 4
U L
Q 3
U S
U M
P F
1 B S A
F A IL
1 R D Y I6
I5
I8
E
I7
I2
I1
I4
F R
I3
Q 2
Q 1
F F
Q 4
U L
Q 3
U S
U M
7805B002
8385_en_02