Table of Contents
Advertisement
Installer Responsibility
The installer is solely responsible for:
1.
Complying with all applicable local or national building codes, including any that may supersede this
manual.
2.
Ensuring that Tamarack Solar and other products are appropriate for the particular installation and the
installation environment.
3.
Using only Tamarack Solar parts and installer supplied parts as specified by Tamarack Solar. Substitution
parts may void the warranty.
4.
Ensuring safe installation of all electrical aspects of the PV array.
5.
Ensuring correct and appropriate design parameters are used in determining the design loading used
for the specific installation. Parameters, such as snow loading, wind speed, exposure and topographic
factor should be confirmed with the local building official or a licensed professional engineer
Warranty Information
Tamarack Solar warrants each Mounting Structure to be free from defects in materials and workmanship for
ten (10) years from the date of first purchase (“Warranty Period”), when installed properly and used for the
purpose for which it is designed, except for the finish, which shall be free from visible peeling, or cracking or
chalking under normal atmospheric conditions for a period of three (3) years, from the earlier of 1) the date
the installation of the Product is completed, or 2) 30 days after the purchase of the Product by the original
Purchaser (“Finish Warranty”). The Finish Warranty does not apply to any foreign residue deposited on the
finish.
Galvanized coated sheet steel components will show rust on cut edges and is normal and will not affect the
structure and function of the mount.
All installations in corrosive atmospheric conditions are excluded. The Finish Warranty is VOID if the practices
specified by AAMA 609 & 610 02 – “Cleaning and Maintenance for Architecturally Finished Aluminum”
(www.aamanet.org) are not followed by Purchaser for Tamarack Solar’s aluminum based products.
The warranty covers the replacement cost of parts to repair the product to proper working condition.
Transportation and incidental costs associated with warranty items are not reimbursable. The warranty does
not cover normal wear, or damage resulting from misuse, abuse, improper installation, negligence, or accident,
or
typographical errors in instruction manuals.
reported in writing to Tamarack Solar within ten (10) days after discovery of such defect. Furthermore, it does
not cover units that have been altered, modified or repaired without written authorization from the
manufacturer or its authorized representative, or units used in a manner or for a purpose other than that
specified by the manufacturer. Tamarack Solar’s entire liability and Purchaser exclusive remedy, whether in
contract, tort or otherwise, for any claim related to or arising out of breach of the warranty covering the
Mounting Structures shall be correction of defects by repair, replacement, or credit, at Tamarack Solar’s
discretion. Refurbished Mounting Structures may be used to repair or replace the Mounting Structures
Tamarack Solar shall have no liability for any injuries or damages to persons or property resulting from any
cause, whatsoever, or any claims or demands brought against Tamarack Solar by Purchaser, any employee of
Purchaser, client of Purchaser, end user of the Product or other party, even if Tamarack Solar has been advised
of the possibility of such claims or demands (collectively, “Third Party Claims”). This limitation applies to all
materials provided by Tamarack Solar during and after the Warranty Period.
The Warranty does not cover any defect that has not been
26
LTP HW
Mount
Series
Advertisement
Table of Contents
